If your washing machine or washer dryer doesn’t spin the first thing to check is the filter if the machine has one. If it’s loose or broken, you need a new drain pump for your washing machine. On an induction pump this will be solid and turn with the cooling fan on the back of the drain pump but on newer magnetic pumps the rotor will turn with a little resistance then “flick” to the next position repeatedly and the same way in both directions. If it does, then the winding’s are okay and it should run, if not you need a new drain pump.Īlso check the drain pump rotor the seals can fail and the rotor area can fill with water making the pump fail. You can do this using a multimeter and a simple continuity check of the drain pump’s motor coil live and neutral connections as it will either make a circuit or not. also check the washing machine drain pump is actually working. You will often find small coins, bra wires, baby clothing, soaks or keys toys etc find their way into the pump manifold (this is the plastic housing that the pump is mounted onto with the hoses attached) something may have blocked one of the inlets or outlets and, on occasion, these can get into the drain outlet hose and block it. You will need to find out why your washing machine didn’t drain the water Normally this would be something obstructing the drain pump from correctly draining the water away but you may have to dig a little deeper than that on occasion. If your washing machine has a lot of water in it when it comes to spin this will either stop the machine spinning or you will get water coming out of the machine sometimes from the soap drawer. Washing machine Blockages if it doesn’t Drain, So It Will Not Spin You may have a timer fault but this is very rare.The PCB known as the printed circuit board or module may have become fault (this is usually due to something electrically shorting it).The motor itself may be have blown or become faulty.The belt from the motor to the drum may be snapped or has come off.The motor carbon brushes may be warn, if the motor does not have brushes then there is a chance that the motor capacitor has failed.If your waste pipe is fitted onto a fitting or goes on to the sink drainage this may also be blocked. The pump filter may be blocked or the hose from the drum going to the pump may be blocked. There could be a blockage on the drain system.We are always asked about customer’s washing machine not spinning, there are a few reasons this can happen and some are very simple fixes and I will list them below and then go in to more depth.Ĭommon washing machine faults that lead to the washing machine not spinning or not spinning properly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |